1. This tape is using PE FILM as backing, one sides are coated with acrylic adhesive.
2. It is Anti-cold Draft, Residue-free, Surface-safe, Wood safe, Airtight Sealing
3. Advantage of PE Reapir Tape: Super waterproof performance, Resistant to extreme weather, Strong tensile strength, Strong stickiness.
4. We can do different sizes and OEM packing as client's need.
Description:
1. This tape is using PE FILM as backing, one side is coated with pressure sensitive adhesive.
2. It is Anti-cold Draft, Residue-free, Surface-safe, Wood safe, Airtight Sealing.
3. Advantage of PE Repair Tape: Super waterproof performance, Resistant to extreme weather, Strong tensile strength, Strong stickiness.
4. We can do different sizes and OEM packing as client's need.
Structure: The specification of the tape consists of two layers, adhesive layer and film backing.
Adhesive: Butyl rubber (pressure-sensitive) for superior waterproof sealing
Film backing: Special blend of stabilized polyethylene.
Features:
1. Heavy duty adhesive
2. Resistant to UV
3. Can be applied over a wide temperature range
4. Good conformability and consistent uniform thickness
5. Easily applied with no special equipment
6. Conformable to irregular shapes.
7. Meets ASTM Standard
Category | Substrate Thickness (um) | Glue+Substrate (um) | Peel Strength (N/25mm) | Permanent Adhesion (hrs) | Temperature Resistance (℃) | Initial Tack (ball#) | Features | Application |
Solvent based PE freezing tape | 90 | 150 | ≥9 | ≥24 | -20℃～100℃ | ≥18 | No residue, low temperature resistance | Protecting the surface of material like window, glass, wood door frame etc. |
Water based PE greenhouse repairing tape | 90 | 170 | ≥8.5 | ≥24 | -20℃～100℃ | ≥20 |
Name: | PE hand tearing tape |
Product Name: | Single Sided Premium PE Protection Tape |
Thickness: | 150mic |
Adhesive Side: | Single Sided |
Material: | PE |
Adhesive Type: | Pressure Sensitive |
Adhesion After Aging: | 250±20 (g/25mm) |
Tensile Strength: | 1.2 Over (kg/10mm) |
Elongation: | 250% Over |
Heat Resistance: | 70±3℃/ 48Hrs |
Cold Resistance: | -13±3℃/ 48Hrs |
Colour: | Clear |
Contamination: | None |
Physical Properties | Test Method | Typical Value | |
English | Metric | ||
Total thickness | ASTM D 1000 | 0.35-1.00mm | |
Backing thickness | ASTM D1000 | 0.22-0.42mm | |
Adhesive thickness | ASTM D1000 | 0.13-0.62mm | |
Width | - | 50-900mm | |
Length | - | 10-183m | |
Backing color | - | White | White |
Tensile strength | ASTM D1000 | 18Mpa | |
Elongation | ASTM D1000 | 280% | 280% |
Peel Adhesion to backing | ASTM D1000 | 10N/cm | |
Cathodic Disbondment | ASTM G 8 | 0.252 in radius | 6.4mm |
Dielectric Strength | ASTM D 149 | 27.0 KV | 27.0KV |
Volume Resistivity | ASTM D 257 | 2.4 10^15 ohm.cm | 2.4 10^15 ohm.cm |
Water Absorptivity | ASTM D 570 | 0.06% | 0.06% |
Water Vapor Transmission Rate 24h | ASTM F 1249 | 0.083g/100sq in/24hr | 0.13g/m2.24h |
Application Temperature | - | -29ºF to 185ºF | -34ºC to +85ºC |
Max Service Temperature | - | 185ºF | +85ºC |
Our AdvantagesOur Advantages
Experienced and able to solve various problems
Our PE repair tape uses a butyl rubber pressure-sensitive adhesive for superior waterproof sealing, and a special blend of stabilized polyethylene film backing. It is designed for greenhouse film repair, surface protection, and cold draft prevention, rather than general carton sealing.
Simply clean the torn area of the greenhouse film, then apply the tape directly over the tear. The tape is 164Ft/50m in length, enough for daily use. It can be used for repairing tears in vegetable greenhouses, flower films, tents, and raincoats.
No. The tape is designed to be residue-free and surface-safe, including on wood, glass, and painted surfaces. It removes cleanly without leaving adhesive behind.
The tape can be applied from -34°C to +85°C (-29°F to 185°F), with a maximum service temperature of +85°C. The solvent-based variant has a temperature resistance of -20°C to 100°C.
